The hydraulic bending machine manufactured by Lemar machinery adopts the welding structure of the whole machine, and the frame is composed of left and right wall panels, worktables, fuel tanks, support blocks, synchronous shafts and sliding blocks, etc.
1. The integrated hydraulic control system has a compact structure, reduces pipeline connections, and improves the reliability and easy maintenance of the system.
2. The sheet metal hydraulic bending machine adopts torsion axis synchronization, and two synchronous swing arms are installed at both ends of the slider, so that the slider movement is always parallel to the worktable, and the anti-eccentric load ability is strong when working. The lower limit stroke of the cylinder is positioned by the mechanical block, and the bending angle of continuous work does not drift. The upper mold is equipped with a deflection compensation mechanism, and the folding precision is high.
3. The stopper and slider stroke adjustment, manual fine-tuning, digital display. The hydraulic power unit has a compact structure and is easy to install. Lemar machinery adopts an integrated hydraulic valve block whose oil channels and joints are restricted to a minimum. It is driven on a sliding block and has a large speed adjustment range, which makes it stable and reliable.
4. The upper die is equipped with a deflection compensation mechanism, which is easy to adjust.
Working table length
Distance between columns
Working table width
main motor power
Maximum open height
Rear gear X-axis stroke
Speed 100 mm/s